Professionell Fusing-ugn Kilncare Hobbyfuser MK2 inkl Controller KCR1, inköpspris ca 18 000 kr, modifierad av tillverkaren i Storbritannien för att kunna köras i ett vanligt eluttag med 10A säkring (som de flesta av oss har i hemmet, många andra ugnar kräver 16A säkring och/eller 3-fasuttag). Innermått 41 x 41 cm. Se nedan för tillverkarens beskrivning av ugnen. Instruktionsböcker medföljer.

Professionell slip- och polermaskin Crystalmaster pro 12 med en poler- och fem slipskivor. Nypris idag ca 23 000 kr.

Utöver detta ingår all utrustning som krävs i en fusingverkstad, bl a:

• mindre slipmaskin Kristall 2000s (nypris idag ca 2200 kr)
• fyra slumpingformar (nypris ca 500-1000 kr styck)
• glasskärare, tänger för att bryta glas och slipklossar (flera av varje, se bild)
• glas för fusing, Bullseye, både stora och mindre bitar (se bilder)
• lödtenn för Tiffany-teknik

Pris: 25 000 kr (för allt)

Hur gärna av dig om du har några frågor!

• - - Nedan är tillverkarens beskrivning av ugnen (förkortad):

Don't be fooled by the name, the Hobbyfuser is a serious glass kiln. The kiln is built for a long life span.

When the Hobbyfuser kiln was in development it was run at 950°C and held for 1 hour over 40 times. At the end of the trial the kiln was stripped down and we were amazed at the lack of deterioration we came across. The Hobbyfuser does not suffer with the usual lazy, slow behaviour associated with other large plug-in kilns. Due to its high performance, infra-red quartz elements and well-designed insulation, the Hobbyfuser will make the all-important 700c to 800c dash at a rate of nearly 450 degrees per hour even with the optional shelf installed. That is only 11 minutes and if a shelf is not used then that same dash can be made in an incredible 9 minutes. This makes the Hobbyfuser almost infinitely controllable ensuring the glass doesn't get "over-worked" by it being in the heat longer than is required. The new 2012 Hobbyfuser has a distinct new feature.

The kiln lid is made from stainless steel and lined out with non-ceramic fibre, press cut and fitted with the use of a hydraulic compressing machine, in a quite unique way for kilns of this type.

The pre-fitted control is the KCR1 controller. It has 9 programs, each having 9 segments. each segment consists of 1 x rate of climb, 1 x target temperature and 1 x dwell/hold. Each one of the 9 KCR1 programs is pre-set with useful glass cycles for fusing and slumping float, Bullseye and Spectrum fusing glass as well as a Bottle slumping program and a couple of stain cycles all developed in association with Creative Glass Guild's team. If these programs are not as you would like them, simply alter them to your own preferences.

The KCR1 gets its data from a new ultra-fast response, stainless steel thermocouple meaning no lag between the kiln temperature and the KCR1s control. Complies to all European and CE requirements. Built in the UK, in Stoke on Trent, parts and service will never be an issue.